Quelltext der Seite Creating an IPSEC VPN between your iPhone and an AVM Fritz!Box

To create a working IPSEC VPN you need the following config file:

 <nowiki>vpncfg {
	connections {
		enabled = yes;
		conn_type = conntype_user;
		name = &quot;[NAME OF MY VPN]&quot;;
		always_renew = no;
		reject_not_encrypted = no;
		dont_filter_netbios = yes;
		localip = 0.0.0.0;
		local_virtualip = 0.0.0.0;
		remoteip = 0.0.0.0;
		remote_virtualip = 192.168.178.201;
		remoteid {
			key_id = &quot;[MY EMAIL-ADDRESS]&quot;;
		}
		mode = phase1_mode_aggressive;
		phase1ss = &quot;all/all/all&quot;;
		keytype = connkeytype_pre_shared;
		key = &quot;[PRE-SHARED KEY SECRET]&quot;;
		cert_do_server_auth = no;
		use_nat_t = yes;
		use_xauth = yes;
		use_cfgmode = no;
		xauth {
			valid = yes;
			username = &quot;[USERNAME]&quot;;
			passwd = &quot;[PASSWORD]&quot;;
		}
		phase2localid {
			ipnet {
				ipaddr = 0.0.0.0;
				mask = 0.0.0.0;
			}
		}
		phase2remoteid {
			ipaddr = 192.168.178.201;
		}
		phase2ss = &quot;esp-all-all/ah-none/comp-all/no-pfs&quot;;
		accesslist = &quot;permit ip 192.168.178.0 255.255.255.0 192.168.178.201 255.255.255.255&quot;;
	}
	ike_forward_rules = &quot;udp 0.0.0.0:500 0.0.0.0:500&quot;,
	&quot;udp 0.0.0.0:4500 0.0.0.0:4500&quot;;
}
// EOF</nowiki>
Please edit the following entries:

* [NAME OF MY VPN] Whatever you like
* [PRE-SHARED KEY SECRET] This should be a very secret password (20 chars or more)
* [USERNAME] Your username
* [PASSWORD] Your password

Upload this config file to your AVM Fritz!Box (VPN Settings).

On the iPhone, you'll find the VPN config under "Settings-&gt;Network-&gt;VPN".
Choose "IPSec", enter your dyndns-name under "Server". "Shared Secret" is the long password [PRE-SHARED KEY SECRET].
Voilá, your done.


[[Kategorie:HOWTOS]]