FHEM und FritzBox 7240 - Versionsgeschichte

Krikan: FHEM(R)

2017-01-24T14:24:08Z

FHEM(R)

← Nächstältere Version		Version vom 24. Januar 2017, 16:24 Uhr
Zeile 1:		Zeile 1:
	Instructions and recommendations for running '''~~Fhem~~ on a FritzBox 7240'''.		Instructions and recommendations for running '''FHEM on a FritzBox 7240'''.
	== CUL ==		== CUL ==
	* flash CUL_V3.hex (from [http://www.atmel.com/ Atmel] page)		* flash CUL_V3.hex (from [http://www.atmel.com/ Atmel] page)
Zeile 10:		Zeile 10:
	== Fritz!Box 7240 ==		== Fritz!Box 7240 ==
	* Update Fritz!Box to Firmware-Version >= 73.05.05		* Update Fritz!Box to Firmware-Version >= 73.05.05
	* download [http://www.fhem.de ~~Fhem~~]		* download [http://www.fhem.de FHEM ]
	* unzip and store at root of your USB-Memory stick in the folder "fhem" (this will be <code>/var/InternerSpeicher/<yourUsbStickName>/fhem/</code> on you Fritz!Box lateron.		* unzip and store at root of your USB-Memory stick in the folder "fhem" (this will be <code>/var/InternerSpeicher/<yourUsbStickName>/fhem/</code> on you Fritz!Box lateron.
	* in this folder, adapt the file "startfhem" if you use more than one storage device (e.g. USB memory stick and 1&1 Online Speicher") with hardcoded destination folder for your fhem path:		* in this folder, adapt the file "startfhem" if you use more than one storage device (e.g. USB memory stick and 1&1 Online Speicher") with hardcoded destination folder for your fhem path:
Zeile 21:		Zeile 21:
	* finally start fhem in telnet:		* finally start fhem in telnet:
	*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>		*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>
	* or use autostart (see "[[FHEM und FritzBox 7170#Autostart fhem\|Autostart ~~Fhem~~]]" for details)		* or use autostart (see "[[FHEM und FritzBox 7170#Autostart fhem\|Autostart FHEM ]]" for details)

	== Open issues ==		== Open issues ==

Conqueror: /* CUL */

2014-02-11T21:08:47Z

CUL

← Nächstältere Version		Version vom 11. Februar 2014, 23:08 Uhr
Zeile 4:		Zeile 4:
	* attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CUL running at the same time)		* attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CUL running at the same time)

	'''Note''': to check if CUL works, in ~~FritzBox settings~~ enable ''USB-Fernanschluss''.		'''Note''': to check if CUL works, in enable ''USB-Fernanschluss'' in Fritz!Box Settings (Heimnetz - USB-Geräte - USB-Fernanschluss).
	Now it gets recognized as CUL868. Remember to disable it again.		Now it gets recognized as CUL868 (see Heimnetz - USB-Geräte - Geräteübersicht). Remember to disable it again.
	The CUL should be recognized as '''''Es handelt sich um ein nicht unterstütztes USB-Gerät'''''. This is OK!		The CUL should be recognized as '''''Es handelt sich um ein nicht unterstütztes USB-Gerät'''''. This is OK!

Ph1959de: Interwiki-Link korrigiert

2013-10-26T12:50:58Z

Interwiki-Link korrigiert

← Nächstältere Version		Version vom 26. Oktober 2013, 14:50 Uhr
Zeile 6:		Zeile 6:
	'''Note''': to check if CUL works, in FritzBox settings enable ''USB-Fernanschluss''.		'''Note''': to check if CUL works, in FritzBox settings enable ''USB-Fernanschluss''.
	Now it gets recognized as CUL868. Remember to disable it again.		Now it gets recognized as CUL868. Remember to disable it again.
	The CUL should be recognized as ~~<code>~~Es handelt sich um ein nicht unterstütztes USB-Gerät~~</code>~~. This is OK!		The CUL should be recognized as '''''Es handelt sich um ein nicht unterstütztes USB-Gerät'''''. This is OK!

	== Fritz!Box 7240 ==		== Fritz!Box 7240 ==
Zeile 21:		Zeile 21:
	* finally start fhem in telnet:		* finally start fhem in telnet:
	*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>		*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>
	* or use autostart ~~=>~~ see [~~http://www.fhemwiki.de/wiki/FHEM_und_FritzBox_7170#Autostart_fhem~~ #Autostart fhem]		* or use autostart (see "[[FHEM und FritzBox 7170#Autostart fhem\|Autostart Fhem]]" for details)

	== Open issues ==		== Open issues ==
	Daily resets with big log files		Daily resets with big log files

	After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several [[FS20 STR Raumthermostat\|FS20-STR]]. These devices ~~send~~ every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger ~~then~~ 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.		After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several [[FS20 STR Raumthermostat\|FS20-STR]]. These devices every 2-3 minutes send off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger than 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.
	<!-- [[Benutzer:Madu99]] -->		<!-- [[Benutzer:Madu99]] -->

Zeile 32:		Zeile 32:
	<!-- [[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET) -->		<!-- [[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET) -->

	See also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - Info wenn wenig Speicher]		== Links ==
			* See also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - Info wenn wenig Speicher]

	[[Kategorie:FritzBox]]		[[Kategorie:FritzBox]]

Generix: /* Fritz!Box 7240 */

2013-10-26T11:09:43Z

Fritz!Box 7240

← Nächstältere Version		Version vom 26. Oktober 2013, 13:09 Uhr
Zeile 21:		Zeile 21:
	* finally start fhem in telnet:		* finally start fhem in telnet:
	*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>		*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>
	* or use autostart => see [#Autostart_fhem #Autostart fhem]		* or use autostart => see [http://www.fhemwiki.de/wiki/FHEM_und_FritzBox_7170#Autostart_fhem #Autostart fhem]

	== Open issues ==		== Open issues ==

Ph1959de: Kleinere Korrekturen

2013-10-01T13:56:49Z

Kleinere Korrekturen

← Nächstältere Version		Version vom 1. Oktober 2013, 15:56 Uhr
Zeile 1:		Zeile 1:
	= CUL =		Instructions and recommendations for running '''Fhem on a FritzBox 7240'''.
	* flash CUL_V3.hex (from ~~<nowiki>~~[http://www.atmel.com/ Atmel]~~</nowiki>~~ page)		== CUL ==
			* flash CUL_V3.hex (from [http://www.atmel.com/ Atmel] page)
	* attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CUL running at the same time)		* attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CUL running at the same time)
	~~<nowiki>~~Note: to check if CUL works ~~enable~~ in FritzBox settings USB-Fernanschluss.
	Now it gets recognized as CUL868.		'''Note''': to check if CUL works, in FritzBox settings enable ''USB-Fernanschluss''.
	Remember to disable it again.		Now it gets recognized as CUL868. Remember to disable it again.
	The CUL should be recognized as "Es handelt sich um ein nicht unterstütztes USB-Gerät."		The CUL should be recognized as <code>Es handelt sich um ein nicht unterstütztes USB-Gerät</code>. This is OK!
	This is OK!~~</nowiki>~~
	= Fritz!Box 7240 =		== Fritz!Box 7240 ==
	* Update Fritz!Box to Firmware-Version >= 73.05.05		* Update Fritz!Box to Firmware-Version >= 73.05.05
	* download ~~<nowiki>~~[http://www.fhem.de ~~http://www.fhem.de~~]~~</nowiki>~~		* download [http://www.fhem.de Fhem]
	* unzip and store at root of your USB-Memory stick in the folder "fhem" (this will be "<code>/var/InternerSpeicher/<yourUsbStickName>/fhem/</code>" on you Fritz!Box ~~later on~~.		* unzip and store at root of your USB-Memory stick in the folder "fhem" (this will be <code>/var/InternerSpeicher/<yourUsbStickName>/fhem/</code> on you Fritz!Box lateron.
	* ~~adapt~~ in this folder the file "startfhem" if you use more ~~then 1~~ storage device (e.g. USB memory stick and "1&1 Online Speicher") with hardcoded destination folder for your fhem path:		* in this folder, adapt the file "startfhem" if you use more than one storage device (e.g. USB memory stick and 1&1 Online Speicher") with hardcoded destination folder for your fhem path:
	*: <code>home=/var/InternerSpeicher/SanDisk-Cruzer-01/fhem</code>		*: <code>home=/var/InternerSpeicher/SanDisk-Cruzer-01/fhem</code>
	* Alternatively disable "1&1 Online Speicher" and use USB memory stick only. This way you don't have to adapt startfhem.		* Alternatively, disable "1&1 Online Speicher" and use USB memory stick only. This way you don't have to adapt startfhem.
	* to use telnet ~~enable with~~ phone dialing #967. To login use same password as for Fritz!Box webfrontend. Now you can edit all of your files using vi in telnet.		* to use telnet, it needs to be enabled via phone by dialing #967. To login, use the same password as for Fritz!Box webfrontend. Now you can edit all of your files using vi in telnet.
	* Now define your "fhem.cfg" to match your configuration, e.g. starting with your housecode:		* Now define your "fhem.cfg" to match your configuration, e.g. starting with your housecode:
	*: <code> define myCUL CUL /dev/ttyACM0 1234 </code>		*: <code> define myCUL CUL /dev/ttyACM0 1234 </code>
Zeile 21:		Zeile 22:
	*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>		*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>
	* or use autostart => see [#Autostart_fhem #Autostart fhem]		* or use autostart => see [#Autostart_fhem #Autostart fhem]
	= Open issues =
			== Open issues ==
	Daily resets with big log files		Daily resets with big log files

	After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several [[FS20 STR Raumthermostat\|FS20-STR]]. These devices send every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger then 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.--[[Benutzer:Madu99]]		After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several [[FS20 STR Raumthermostat\|FS20-STR]]. These devices send every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger then 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.
			<!-- [[Benutzer:Madu99]] -->

	After looking ~~more~~ into ~~this~~, it seems that the 7240 gets a memory problem when log files ~~gets~~ bigger ~~then~~ ~800KB. I changed the logging from monthly files to weekly files (using <code>./log/fhem-%Y-%m-%V.log</code>). This way files should ~~never~~ get ~~this~~ big. Since then 7240 runs stable without any problems.--[[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET)		After looking into the details, it seems that the 7240 gets a memory problem when log files get bigger than ~800KB. I changed the logging from monthly files to weekly files (using <code>./log/fhem-%Y-%m-%V.log</code>). This way, files should no longer get that big. Since then, 7240 runs stable without any problems.
			<!-- [[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET) -->

	~~see~~ also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - ~~info~~ wenn wenig Speicher]		See also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - Info wenn wenig Speicher]

	[[Kategorie:FritzBox]]		[[Kategorie:FritzBox]]

Markusbloch: /* Open issues */

2013-05-12T13:08:32Z

Open issues

← Nächstältere Version		Version vom 12. Mai 2013, 15:08 Uhr
Zeile 22:		Zeile 22:
	* or use autostart => see [#Autostart_fhem #Autostart fhem]		* or use autostart => see [#Autostart_fhem #Autostart fhem]
	= Open issues =		= Open issues =
	~~<dl><dt>~~ Daily resets with big log files~~</dt><dd>~~		Daily resets with big log files
	~~</dd></dl>~~
	After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several ~~<a href="/w/index.php?title=~~FS20-STR~~&action=edit&redlink=1" class="new" title="~~FS20-STR ~~(Seite nicht vorhanden)">FS20-STR</a>~~. These devices send every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger then 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.--[[Benutzer:Madu99]]		After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several [[FS20 STR Raumthermostat\|FS20-STR]]. These devices send every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger then 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.--[[Benutzer:Madu99]]

			After looking more into this, it seems that the 7240 gets a memory problem when log files gets bigger then ~800KB. I changed the logging from monthly files to weekly files (using <code>./log/fhem-%Y-%m-%V.log</code>). This way files should never get this big. Since then 7240 runs stable without any problems.--[[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET)

			see also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - info wenn wenig Speicher]

	<dl><dd><dl><dd>After looking more into this, it seems that the 7240 gets a memory problem when log files gets bigger then ~800KB. I changed the logging from monthly files to weekly files (using <code>./log/fhem-%Y-%m-%V.log</code>). This way files should never get this big. Since then 7240 runs stable without any problems.--[[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET)
	~~<dl><dd>see also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - info wenn wenig Speicher]~~
	~~</dd></dl>~~
	~~</dd></dl>~~
	~~</dd></dl>~~
	[[Kategorie:FritzBox]]		[[Kategorie:FritzBox]]

Markusbloch: /* Open issues */

2013-05-12T13:04:03Z

Open issues

← Nächstältere Version		Version vom 12. Mai 2013, 15:04 Uhr
Zeile 31:		Zeile 31:
	</dd></dl>		</dd></dl>
	</dd></dl>		</dd></dl>
			[[Kategorie:FritzBox]]

Generix: Die Seite wurde neu angelegt: „= CUL = * flash CUL_V3.hex (from [http://www.atmel.com/ Atmel] page) * attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CU…“

2013-05-10T20:44:13Z

Die Seite wurde neu angelegt: „= CUL = * flash CUL_V3.hex (from <nowiki>[http://www.atmel.com/ Atmel]</nowiki> page) * attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CU…“

Neue Seite

= CUL =
* flash CUL_V3.hex (from <nowiki>[http://www.atmel.com/ Atmel]</nowiki> page)
* attach CUL to Fritz!Box (with a USB Hub to have USB-Memory stick and CUL running at the same time)
<nowiki>Note: to check if CUL works enable in FritzBox settings USB-Fernanschluss.
Now it gets recognized as CUL868.
Remember to disable it again.
The CUL should be recognized as "Es handelt sich um ein nicht unterstütztes USB-Gerät."
This is OK!</nowiki>
= Fritz!Box 7240 =
* Update Fritz!Box to Firmware-Version >= 73.05.05
* download <nowiki>[http://www.fhem.de http://www.fhem.de]</nowiki>
* unzip and store at root of your USB-Memory stick in the folder "fhem" (this will be "<code>/var/InternerSpeicher/<yourUsbStickName>/fhem/</code>" on you Fritz!Box later on.
* adapt in this folder the file "startfhem" if you use more then 1 storage device (e.g. USB memory stick and "1&1 Online Speicher") with hardcoded destination folder for your fhem path:
*: <code>home=/var/InternerSpeicher/SanDisk-Cruzer-01/fhem</code>
* Alternatively disable "1&1 Online Speicher" and use USB memory stick only. This way you don't have to adapt startfhem.
* to use telnet enable with phone dialing #96*7*. To login use same password as for Fritz!Box webfrontend. Now you can edit all of your files using vi in telnet.
* Now define your "fhem.cfg" to match your configuration, e.g. starting with your housecode:
*: <code> define myCUL CUL /dev/ttyACM0 1234 </code>
*: ...
* finally start fhem in telnet:
*: <code>/var/InternerSpeicher/SanDisk-Cruzer-01/fhem/startfhem</code>
* or use autostart => see [#Autostart_fhem #Autostart fhem]
= Open issues =
<dl><dt> Daily resets with big log files</dt><dd>
</dd></dl>
After 1 week running perfectly I was seeing regular/daily resets. The problem in my setting is that I am using several <a href="/w/index.php?title=FS20-STR&action=edit&redlink=1" class="new" title="FS20-STR (Seite nicht vorhanden)">FS20-STR</a>. These devices send every 2-3 minutes off-for-timer or on-for-timers signals. These events get logged in the monthly log file. After this log was bigger then 1MB I have seen these resets. After I emptied/deleted the file the box is running stable again.--[[Benutzer:Madu99]]

<dl><dd><dl><dd>After looking more into this, it seems that the 7240 gets a memory problem when log files gets bigger then ~800KB. I changed the logging from monthly files to weekly files (using <code>./log/fhem-%Y-%m-%V.log</code>). This way files should never get this big. Since then 7240 runs stable without any problems.--[[Benutzer:Madu99]] 01:44, 29. Dez. 2011 (CET)
<dl><dd>see also [http://groups.google.com/group/fhem-users/browse_thread/thread/8acca4c2a63e1dce GoogleGroups:FHEM auf Fritzbox - Logfile - info wenn wenig Speicher]
</dd></dl>
</dd></dl>
</dd></dl>