Suchergebnisse

define sequenceSwitch_B0_ShortAndLongPress sequence deviceSwitch:B0 0.5 deviceSwitch:buttons:.released define sequenceSwitch_DimUp sequence dummyDimmer_DimUp 0.1 deviceSwitch:buttons:.released

Am 07.09.2014 wurde für das Kommando <code>sequence</code> das Attribut <code>triggerPartial</code> eingeführt. Damit kann ein …2016 nicht mehr. Bitte auf die neuere und einfachere Lösungsvariante <code>sequence</code> unter Nutzung des Attribut <code>triggerPartial</code> umstellen!}}

* [[sequence]]<ref>{{Link2CmdRef|Anker=sequence|Lang=de}}</ref> generiert Event nach Empfang einer definierten Event-Sequen

| sequence

* sequence

* [[sequence]]

…etXXXX zunächst alle Notifys in FHEM benachrichtigt (d.h. notify, FileLog, sequence, watchdog, DOIF, etc), auch wenn diese mit dem Event nichts anfangen könne

…e modul</ref>, {{Link2CmdRef|Anker=sequence|Lang=de|Label=sequence}}<ref>[[sequence]] handles series of [[Event|events]]</ref>, {{Link2CmdRef|Anker=watchdog|La

…adingsGroup|readingsHistory|readingsProxy|remotecontrol|SUNRISE_EL|SYSSTAT|sequence|speedtest|statistics|structure|telnet|Twilight|THRESHOLD|Utils|WeekdayTime

…m Modul</ref>, {{Link2CmdRef|Anker=sequence|Lang=de|Label=sequence}}<ref>[[sequence]] verknüpft eine Folge von [[Ereignis|Ereignissen]]</ref>, {{Link2CmdRef|A

This is an simple sequence for starting all over with an qnap TS-219 after

=== Sequence nutzen === :<code>define <name> sequence <re1> <timeout1> <re2> [<timeout2> <re3> ...] </code>

If it matches, it starts a login sequence. In the above example all steps request the same URL. In step 1 only the de …URL. It should be possible to read more than just the $sid from the login sequence.

Sequence nbr = 6 Sequence nbr = 7

…13:12:10.012 3: <device> [KNXIO_ReadH 426]: TunnelRequest received: out of sequence, (seqcntrRx= xxx seqcntrTx= yyy ) - no ack & discard

…e HEX code such as "A90" or an array of int values when transmitting a RAW sequence

…e to configure the CUL into pairing mode for 45 seconds. Initiate the pair sequence on the device by:

:internal sequence number of the last report from the board to Fhem.

CC1100 initialization sequence on one of the MAX devices (not Cube) (format: addr value, both in hex):

* (fix) memory allocation fix during shutdown/restart sequence